FC3 – ELECTROMAGNETIC FLOW METER
 |
 |
 |
- time and temperature bi-directional measurement stability
- internal CPU (able of corrections in case of low flow rate etc.)
- autodiagnostics of electronic unit and pipeline
- datalogger memory up to 15 000 values (programmable sample rate)
- data recovery in case of loss of data (due to high level electrostatic discharge etc.)
- detection of empty pipe
- option of setting low flow rate bandwidth
- dead zone setting
- diagnostic of internal temperature
- RS 232 and RS 485 (MODBUS protocol) communication outputs
- compact / remote version
Technical specification:
DN |
10 to 1200mm | |
|---|---|---|
PN |
1,0 to 4,0MPa | |
flow range |
0,1 to 10m/s (0,02 to 5000l/s) | |
accuracy |
0,25% (0,5 to 10m/s) of measured value |
|
maximal medium temperature |
70°C (158°F) for hard rubber lining 150°C (302°F) for PTFE lining |
|
ambient temperature |
-20°C to +60°C (-4 to +140°F) | |
power supply |
85 to 264V AC(+10%, -15%), 50Hz / 60Hz, |
|
power consumption |
10VA | |
linning |
hard rubber |
|
electrodes |
standard: | stainless steel (AISI 316 TI) |
| chemically resistant: | titanium, hastelloy, tantalum | |
flanges |
flat, in line with: | ÈSN |
| DIN | ||
| ANSI | ||
sensor design |
flanged, flangless, food industry and all stainless steel design | |
protection category |
compact version: | IP 67 |
| remote version: | converter IP 67 |
|
programmable outputs |
frequency | 0 to 12kHz |
| pulse | 0 to 500Hz | |
| status | programmable | |
| current loop | 4 to 20mA | |
input |
digital input with programmable function | |
communication |
RS 485 (MODBUS protocol), RS 232 | |
control |
keybord, magnetic pointer, RS 485 or RS 232 | |
low-flow cutoff |
programmable value | |
time constant |
settable in range 1 to 20s | |
other features |
empty pipe detection, test of excitation coils |
|
conformity requirements |
LVD (safety) according to EN 61010-1, EN 61010-1 / A2 |
|