FC2 – ELECTROMAGNETIC FLOW METER
 |
 |
 |
- high-accuracy within ±0,2%
- bi-directional flow metering
- stability of measurement and long operating lifetime
- simple to use
- large permanently backlit graphical display
- customizable layout
- real-time clock
- storage for real-time data
- empty pipe detection
- dumping of sudden flow changes
- setting of dead zone
- 3 multifunctional outputs
- Win10 software support
- compact / remote design
Converter:
power supply |
230V AC (+10%, -15%), 50Hz 15 to 24V AC / 12 to 34 V DC |
|
|---|---|---|
power consumption |
10VA max. | |
protection category |
IP 67 | |
operating temperature |
0°C to +45°C (32 to 113°F) | |
measurement range |
0,1 to 10m/s (0,02 to 5000l/s) | |
measurement error |
≤ 0,2%of measured value within range of 5 to 100% Qmax. | |
indications |
large permanently backlit graphical display | |
manual control |
five buttons | |
output (galvanically separated) |
analogue current | active 0 to 20mA or 4 to 20mA into load < 500Ω |
| 2x multifunctional | pulse or status reley, load 125V ~ / 1A or 30V/2A transistor NPN, load 30V/50mA |
|
communication |
RS232 | |
casing material |
Aluminium | |
weight |
3Kg | |
Sensor:
DN |
10 to 1200mm | |
|---|---|---|
conductivity of measured liquid |
≥ 5μS.cm-1 | |
casing |
IP67 or IP68 | |
lining |
hard rubber PTFE / E-CTFE |
|
maximal temperature of measured medium |
hard hubber: | 80°C (176°F) |
| PTFE: | 150°C (302°F) | |
| E-CTFE: | 130°C (266°F) | |
PN |
1,0 to 4,0MPa | |
electrodes |
standart: | stainless steel (AISI 316 TI) |
| chemically resistant: | titanium, hastelloy, tantalum | |
flanges |
flat, in line with: | ČSN |
| DIN | ||
| ANSI | ||
cable lenght for remote design |
5 to 30m | |